In this training, you will learn about the OA function, framework, roadmap and objectives.
By the end of this training, you'll be familiar with Operations Assurance.
Set aside 60 minutes to complete this training.
The course will provide a working understanding process safety management, why it is important for each role, and how to use SBM’s process safety management system. Set aside 2 hours to complete the training.
Discipline reviewer: Michelly Moretti
This training covers the importance of process safety, the key concepts in process safety and risk management, HEMP and its importance and role of reporting and investigation in process safety management.
Set aside 40 minutes to complete the training.
Discipline Reviewer: Michelly Moretti
The Hearing Conservation Program, PCA, objective is to ensure employee's hearing capacity against the potential damaging effects of excessive exposure to continuous and intermittent noise in the workplace. It will take about 25 minutes to complete.
Discipline reviewer: RelyOn Nutec Brazil
The training related to NR-25 is a training requested by Brazilian Regulatory Standard No. 25, which states that all workers involved in the collection, handling, packaging, storage, transportation, treatment, and disposal of industrial waste must be continuously trained by the company.
Discipline reviewer: Laure Ascheri/Fred Macedo
PEI training is a regulatory training required by IBAMA in the Operational License to all responders that are required to act during an oil spill. This training presentation is prepared for all FPSOs in Santos Basin Geographic Area of Petrobras. Set aside 2 hours to complete.
Discipline reviewer: Steffanie Sargo
The Respiratory Protection Program aim to ensure the correct use of respiratory protection appropriate to the risk, safeguarding the health of the employee during the performance of their activities. The Program will take about 25 minutes to complete and is available in English and Portuguese.
Discipline reviewer: RelyOn Nutec
This awareness training aims to educate core crew and visitors about the potential hazards associated with benzene exposure, the importance of safe handling and storage practices, and the regulatory requirements governing its use in the oil and gas industry. Set aside 30 minutes to review.
Discipline reviewer: Hilton Duminy
Change Vision training outlining the Management of Change Process in SBM. Change Vision will be implemented in the fleet Q1, 2022.
Discipline reviewer: Carlos Cunha
A “competent person” is one who has achieved a level of technical skill (theoretical knowledge & practical experience) to be able to complete a task or activity safely and to the specified standard. This training aims to qualify Supervisors to perform knowledge and skills verification in their Dept.
Discipline reviewer: John Woollam
This training is prepared to make you aware about all the associated risks of Confined Spaces. The training will cover: Gas testing procedure, Roles and responsibilities of everyone involved in CSE and CSE rescue plan and emergency arrangements. It will take about 30 minutes to complete.
Discipline reviewer: Andrew Douglass
The SBM Control of Substances Hazardous to Health training provide general COSHH awareness and awareness of the SBM COSHH procedures. It takes about 40 minutes to complete.
Discipline reviewer: Andrew Douglass
The purpose of this training is to make you aware about all the associated risks that arise from the dropped object. The training will cover: What is Dropped Objects. Hazard and Risks Associated. Dropped Objects Statistics. How to reduce the Risks. Roles and Responsibilities. It takes about 25 min.
Discipline reviewer: Andrew Douglass
Learn the definition of fatigue. Describe the causes and symptoms of fatigue. Identify signs and symptoms of fatigue. Learn how to self-manage fatigue.
Discipline reviewer: Carla Barata
GEMS is the SBM Offshore Global Enterprise Management System. It includes minimum requirements from international standards as well as industry best practices. This 30 minute training will help you start using GEMS. It will also cover Unit Documentation in GEMS View for Operations, GVO.
Discipline reviewer: Nicolo Guglielmi
This specific training is aimed at SBM Offshore Fire Watcher's to ensure they fully understand their responsibilities, which are outlined in the Offshore Hot Work Instruction. The training will take about 15 minutes to complete.
Discipline reviewer: Andrew Douglass
The SBM Fire Water System will help you improve your knowledge of the Fire Water System onboard the FPSO. It will take you about 30 minutes to complete. There is a brief knowledge check with an 80 % pass mark at the end.
Discipline reviewer: Andrew Douglass
The SBM Hand and Finger Safety Awareness covers the risk of injuries to hands and fingers while working offshore and how to prevent such injuries through correct planning, risk assessments, toolbox talks and carrying out work safely. It will take about 15 minutes to complete.
Discipline reviewer: Andrew Douglass
The SBM Heat Stress Training is for those working in places exposed to heat: Engine room, AMS, pump room, mechanical workshop, confined spaces, galley, main deck (areas near the Flare or exposed to the sun). Set aside 30 minutes to complete the training.
Discipline reviewer: Darlaine Costa
The objective of the H2S training is to educate our personnel about the physical and chemical properties, toxicity, concentration levels, personal protective equipment use, detection measures, rescue and first aid when dealing with H2S.
Discipline reviewer: Andrew Douglass
This training is for onboard management and will cover the Purpose of Investigation, Investigation Process, Conducting the Investigation – The team, Investigation Methods, Data Collection – Interviews/Photos, Analyzing the information and implementing appropriate actions. 45 min to complete.
Discipline reviewer: Marcelo Marquez
SBM Offshore adopted the updated set of Life Saving Rules on June 12th 2019.Through this Elearning you will find out more details on the Life Saving Rules, what they are in detail and what you need to do to ensure compliance. Set aside 15 minutes to complete this part 1 training.
Discipline reviewer: Andrew Douglass
SBM Offshore adopted the updated set of Life Saving Rules on June 12th 2019.Through this Elearning you will find out more details on the Life Saving Rules, what they are in detail and what you need to do to ensure compliance. Set aside 15 minutes to complete this part 2 training.
Discipline reviewer: Andrew Douglass
The purpose of this training is to make you aware about all the associated risks related to manual handling operation, the techniques to use and manual handling mechanics. The training takes approximately 20 minutes to complete.
Discipline reviewer: Andrew Douglass
Learn what is mental health and understand its spectrum. Learn the risk factors for poor mental health as well the protective factors to maintain good mental health. Learn what are the common mental health illnesses. Learn about the causes of poor mental health at work. Understand stress versus ment.
Discipline reviewer: Carla Barata
The purpose of this training is to ensure systems are implemented to prevent hearing damage and to ensure adequate control of the noise present onboard. At the end of the training there is an assessment with an 80% pass mark. This course takes approximately 40 minutes to complete.
Discipline reviewer: Carla Barata
The SBM NR 34 Admission training is a mandatory requirement under the NR 34 covering information on the risks inherent to the activities performed Offshore, the working conditions and environment, EPC and PPE. Set aside 4 hours to complete the training.
Discipline reviewer: Carlos Cunha
The SOPEP awareness training will help you understand the various systems implemented to prevent any spill onboard or into the sea and to ensure adequate control of the spill should one occur. Set aside 30 minutes to complete this training.
Discipline reviewer:
In this Training we cover all aspects regarding the Performing Authority role in the SBM work permit system. It is intended for the Performing Authority who only accepts the work permit from the Permit to Work Coordinator. There is a knowledge assessment after each section. 30 minutes to complete.
Discipline reviewer: Carlos Cunha
This course is intended for anyone who will be working under a work permit on one of the SBM Offshore Installation and does not replace the specific courses created for working with Permit vision, SBM's digital Permit to Work system. The course takes about 30 minutes to complete.
Discipline reviewer: Carlos Cunha
The SBM Permit Vision Level 1 training cover the Electronic Permit to Work Instruction Roles and Responsibilities, Permits and work control documents, Access and Navigation, Workflow and templates. It takes about 80 minutes to complete and have a test of 20 questions at the end.
Discipline reviewer: Carlos Cunha
The SBM Permit Vision Level 2 training cover Roles and Responsibilities, Drafting an ICC, Additional system functionality, Permit dependencies, Locked Valve Mngmt., Supplementary Certificates and Audits & Actions . It takes about 80 min to complete and have a test after each chapter and at the end.
Discipline reviewer: Carlos Cunha
This training refers back to the GEMS Instruction, Personal Protective Equipement and is prepared to meet the demands of the Brazilian NR 6 requirement for providing training on PPE. It is highly relevant also for the personnel not working in Brazil. Set aside 40 minutes to complete it.
Discipline reviewer: Eloise dos Santos Sales
This dual language PMSI Course (English & Brazilian Portuguese) is part of your induction and must be completed before embarking on an SBM Offshore unit. It consist of three levels and a final test that has to be passed with 80% score. It takes about 30 minutes to complete from an onshore computer.
Discipline reviewer: Andrew Douglass
Naturally Occurring Radioactive Material (NORM), are found within the reservoirs where oil and gas are produced. NORM may therefore be found in Topside equipment, Pipework and in Cargo Tanks. This training will teach you what radiation is and how it is managed. It takes about 20 min to complete.
Discipline reviewer: Andrew Douglass
Safe Isolation and Reinstatement of Plant encompasses a series of procedures to be carried out in order to safely shut down and isolate plant equipment in preparation for maintenance activities. This comprehensive training takes about 4 hours to complete. Best of luck.
Discipline reviewer: Guy Westwood
Shift Vision is a key part of the Vision suite. This course consist of three topics, Introduction, Managing Logbooks and Managing Handover. The Shift Vision is to be used first onboard SBM FPSO units in Brazil. Target audience is Offshore Personnel in this region. Set aside 45 minutes to complete.
Discipline reviewer: Carlos Cunha
Welcome to this training about Task Risk Assessment (TRA) in practice. The objective of this training is to: -Recap of the TRA introduction -Prepare a TRA in practice At the end of the training there is a knowledge assessment with an 80% pass mark. The training should take about 35 min.
Discipline reviewer: Carlos Cunha
A Toolbox talks is the Pre-Job discussion by means of which supervisors discuss and clarify the upcoming work with the people who will be performing the work. This training will help you understand the need and the purpose as well as the documentation to be completed. This training will take 20 min.
Discipline reviewer: Andrew Douglass
The Tuberculosis Awareness Course deliver the essential information points covering the Tuberculosis related topics. What is Tuberculosis? Recognizing Symptons, Understanding who is at risk and more.
Discipline reviewer: Jean David Sabaton
The purpose of this training is to make Offshore Personnel aware about all the associated risks of the work at height operation. At the end of the training there is a brief knowledge check with an 80% pass mark. This training takes approximately 25 minutes to complete.
Discipline reviewer: Andrew Douglass
This course aims at supporting people in conducting root cause analysis incident investigation using the 5 whys method. The training is divided in 2 parts, this e-learning being complemented by a face to face exercise with the PSM Champions onboard where you will apply what you learned.
Discipline reviewer: Valentin Perraud
This online training is prepared for the Fleet Safety Officers. It describes how to navigate within the SYPOL Chemical Management Software. With the SYPOL software we control the MSDS/ COSHH database onboard the SBM Offshore. Set aside at least 45 minutes to understand its use.
Discipline reviewer: Vlad Matei